The Akrapovic Slip-On exhaust system with link pipe is developed for the race track.
- It will replace stock muffler, stock valve and stock catalytic converter link pipe.
- The Slip-On exhaust delivers increased performance and reduces the weight substantial.
- Power: +6.2kW at 9300 rpm
- Weight: -4.7kg
- Torque: +7.3Nm at 7000 rpm
|
| Parts Schematic |
|
| Installation Instructions |
|
| Dyno Chart |
This item is legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway.
Write Review
-
No update? 2011 first gen exhaust?
I purchased this system to replace the stock exhaust and cinder block sized catalytic converter, my only gripe is that there was not an o2 bung on the cat as was shown in the instructions, the schematic showed a "lambda plug" but it was not in the parts bag, fortunately as a pack rat I had an Akrapovic lambda plug from a full system I had installed on a 2010 R6, otherwise it would have been an additional $30 for the plug, otherwise the quality and ease of install is high, the insert was a challenge to remove though, otherwise I would have rated it at 5 stars
-
Worth mod
Notorious increase in power but mostly in torque where is missing. No need to play around with ECU unless racing or full power is sought. Highly recommended
- Availability:
- STG Part Number:
- A|1040-S-K10SO13-ZT|0
- Manufacturer's Part Number:
