Brembo 19mmx16mm Billet CNC Race Radial Clutch Master Cylinder w/ Folding Lever

For Brembo this product represents the clutch master par excellence in the Racing sector. Used successfully in Enduro, Moto2 and Moto3 competitions, this clutch master guarantees the best performance combined with the highest reliability.

The billet machined brake master cylinder uses a 16 mm diameter piston, a lever centre distance of 18 and an folding long lever.

The billet machining, which uses sophisticated numerically controlled equipment, provides maximum lightweight values thanks to optimum machining tolerances and a higher general product quality, even aesthetically.

For the surface finishing oxidation was chosen which is normally used in MotoGP and Superbike.

This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the€œracing” field. Please contact our distributor for any further clarification.

TECHNICAL FEATURES

• Material: Billet aluminium
• Piston mm: 16
• Lever ratio: 18
• Surface protection: Hard anodized
• Weight (gr): 286

Items required to complete installation:

• We suggest using the Brembo Brake Reservoir Mounting Kit (Brembo Part# 110.A263.85) as it includes a reservoir, bracket, hardware and tubing.
• Brembo Master Cylinders REQUIRE an M10x1.0 banjo bolt. If you have 2 lines coming off the master you will need a double M10x1.0 banjo bolt and 3 washers, if you have 1 line off the master you will need a single M10x1.0 banjo bolt and 2 washers.
• If you intend to use your stock reservoir you will require a length of 6mm Tygon 2375 Tubing and 2 3/8" Spring Clamps.
• Brake fluid will be needed. We suggest replacing all of the fluid in the system when you install the master.
• The Speed Bleeder Bag and Hose Kit is a real asset when bleeding the brakes. It can keeps the job clean and can be reused.