Brembo Brake Reservoir Mounting Kit for RCS and other Brembo Master Cylinders

Used the original mount due to simplicity great part

Fantastic quality Stunning braking power SBTG rocks Support this great company!!

The way the reservoir and bracket interface isn’t great. It’s not bad but not how I would have chose to design it. The reservoir has a locating tab but the bracket doesn’t incorporate it for some reason. I drilled a hole in the bracket to incorporate the locating tab. That helped.

I have two of these on 2 bikes with RCS masters. The bracket feels kinda cheap, and I usually have to bend it to get the reservoir to sit where I want. It doesn't bolt to the rcs clip on clamp very well either. I also don't like the cap on the reservoir being held on by screws. It does work, but feels like an afterthought.

I have two of these on 2 bikes with RCS masters. The bracket feels kinda cheap, and I usually have to bend it to get the reservoir to sit where I want. It doesn't bolt to the rcs clip on clamp very well either. I also don't like the cap on the reservoir being held on by screws. It does work, but feels like an afterthought.

The Kit is complete with all parts necessary to install on a Brembo RCS Brake Master Cylinder. Bracket is aluminum and can be somewhat shaped to conform to the bike's fairing/handlebar set-up.

good appearance. bracket orientation interfirs with my bmw fairing. Can not understand fitment and great clearance of the bolt shoulder to aluminum bracket.

I purchased the reservoir kit to accompany the RCS19cc and ensure my install was painless. Everything is as you’d expect from a reservoir and the bracket is sturdy. Unlike the picture, I had to mount it to the underside of the bracket so it didn’t hit the fairing (2012 S1000rr). The only downfall to the kit is how the reservoir mounts onto the bracket, which allows it to spin. This isn’t really an issue once the line is connected from it to the master cylinder but definitely isn’t as solid as the oem mount. The bracket, with the reservoir mounted to the bottom, also puts the kit in almost the same location as the oem one and I wonder if I could have gotten away without it. Either way, it’s installed, looks nice, and works.

Not a bad kit, but it should have tygon hose and i would think it would have the more recent tinted reservoir. But it gets the job done, although not the most appealing visually. Will work till i sort out a solution from lightech or rizoma.