Features:
- Replace your bulky signals with these sleek and aerodynamic flush marker lights
- Forward-facing, super bright LEDs for enhanced safety
- Easy plug-and-play installation
- Note: Images shown are generic. Each part is model specific and may vary from images shown.
Write Review
-
some minor flaws
Actual part fitment is excellent. Plugs going to the bikes wiring harness are a rough fit though and may need a razor blade shaving on the male end to work properly. Also recommend buying proper LED relays and NOT using simple tap-in resistors. Resistors cause very dim output and allow only the side facing leds to illuminate. Therefore be sure to buy appropriate LED relays when using this product.
-
Cheap & poorly fitting
I was disappointed when I went to install these. The backing to the packaging described an integrated tail light kit rather than just tail lights. I first attempted to test that they worked and could barely plug them into the stock female connector due to the male connector on these lights being over-sized. After some encouragement I was able to fully seat them and click the turn signal...solid light, no blinking; so these are not built with the proper resistance to trip the relay. With no instructions included to inform swapping the relay or put an inline resistor in to rebalance the circuit. Because I have a multimeter, soldering iron, know-how, and one of the last remaining radio shacks near-by I will get it to work, but I am disappointed by the value, packaging, and information from this item. Oh and no mounting method besides some double stick tape that I am suspect of, so I will come up with a method that bolts it on.
- Availability:
- STG Part Number:
- Manufacturer's Part Number:
