Cox Racing Radiator Guards are engineered so they are manufactured without welding. Frames are cut from a sheet of .060 5051 aluminum. The screen is .034 expanded aluminum. Then they hard anodize every one for a chip-free, tough finish! To mount this guard, Zip tie it to the upper radiator straps and bolt to the lower radiator mount using the existing fastener.
Available in BLACK ONLY
Write Review
-
Must have PATIENCE to install
Well constructed, good finish, very exact fit. If installing on ZX-14R (2017) you must remove the horn and mount assemble. After install it will mount back in with no modifications. To achieve proper clearance, thick washer goes between guard and radiator (to center guard). The thin washer goes under bolt and must be greased, so it spins freely when tightened. My hands are large, so space was tight, but I did not have to remove any body panels or front wheel. The finished product looks GREAT, and I am happy to know my $1800 radiator is protected from flying debris and rocks. (Logo on bottom corner is etched into the metal, not a cheap sticker)
- Availability:
- STG Part Number:
- C|TR536233|1
- Manufacturer's Part Number:
