Daytona Twin Tec Twin Scan WEGO Sensor Upgrade Kit

Part Notes: Requires use of a PC with Windows 7, Windows 8 or Windows 10 for display. Models equipped with 12 mm oxygen sensors will require 18 mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ kit 18 mm oxygen sensors.

Features:

• Logs engine data along with the actual air/fuel ratio (AFR); logged AFR data can be analyzed and displayed.
• Enable or disable settings in the ECM such as ACR (automatic compression release for performing engine compression testing), EITMS, cruise control, and active exhaust, reads and sets engine idle speed rpm
• Enable or disable settings in the BCM for ignition switch, new radio installation, bank angle sensor for trike installs, program fog light function, ABS installation and enable service state
• Activates modules, lights, indicators fuel pump drain and electronic throttle sweep; tests different actuators, light and indicators
• Data logging automatically triggered when a trouble code is set and shows the data before and after code is set
• Real-time display of engine sensors along with built-in data logging will store data for up to one hour
• Latest software will include the latest firmware for easy remote updating of the Twin Scan 4
• Communicates with ECM, TSSM and BCM to read, then clear diagnostic trouble codes
• Programs and reads key fobs, programs PIN and disables security
• Calibrate speedometer, remove new speedometer display of VinErr
• Easy to navigate software
• Made in the USA
• Kit Includes:
• One WEGO IIID Interface
• Two Bosch LSU 4.2 wide-band oxygen sensors
• Two 18 mm x 1.5 mm weld nuts
• Two 18 mm x 1.5 mm hex socket plugs

Specifications:

• Product Name: Sensor
• Model: Twin Scan / WEGO IIID
• Color/Finish: Black / Gray / White
• Base Color: Black
• Units: Kit
• Riding Style: Street