Dynojet Power Commander Shift Rod B

The Dynojet Shift Rods are designed for certain Quick Shifters only for specific bike models. As a result, not all bike models require the purchase of a Shift Rod Kit.

Note: Shift Rods are designed for specific Quick Shifters. Required only for specific motorcycle models. Not all Quick Shifters need an additional Shift Rod purchase. For additional information, contact STG support.

• Shift Rod A (32104060), M6 female / M6 female. 24mm inside threaded portion, 135mm overall length.
• Shift Rod B (32104050), M6 male / M6 male. 32mm threaded male ends, 135mm overall length.
• Shift Rod C (32104030), M6 female / M6 male. 32mm male threaded portion, 24mm of inside threaded portion, 97mm overall length.
• Shift Rod D (32105030), M8 female / M6 male. 32mm male threaded portion, 24mm of inside threaded portion, 97mm overall length.

IMPORTANT FITMENT NOTE: The chart below assumes stock rearsets will be installed. If your bike is equipped with aftermarket rearsets you need to account for any differences between the stock shift rods and those used with your aftermarket kit. As always please contact us before ordering if you require any assistane.

Aprilia

• RSV Mille 04-08 :LINEAR PUSH Type
• Tuono 03-05 :LINEAR PUSH Type

Ducati

• 749 03-06 :LINEAR PUSH Type
• 848 2008 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• 999 03-06 :LINEAR PUSH Type
• 1098 07-08 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• 1098R 2008 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• 1198 2009 :PUSH Type

Honda

• CBR 600rr F4i 01-06 :PUSH Type One (1) Shift Rod B
• CBR 600rr 03-04 :PUSH Type One (1) Shift Rod A
• CBR 600rr 05-06 :PUSH Type One (1) Shift Rod A
• CBR 600rr 07-08 :PUSH Type One (1) Shift Rod A
• CBR 600rr 09-10 :PUSH Type One (1) Shift Rod A
• CBR 929rr 00-01 :PUSH Type One (1) Shift Rod A
• CBR 954rr 02-03 :PUSH Type One (1) Shift Rod A
• RC51 00-01 :LINEAR PUSH Type
• RC51 02-06 :LINEAR PUSH Type
• CBR 1000rr 04-05 :PUSH Type One (1) Shift Rod A (remove/cut off 1 section)
• CBR 1000rr 06-07 :PUSH Type One (1) Shift Rod A (remove/cut off 1 section)
• CBR 1000rr 2008 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C
• CBR 1000rr 09-16 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C

Kawasaki

• ZX-6r 03-04 :PUSH Type One (1) Shift Rod A
• ZX-6r 05-06 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• ZX-6RR 2003 :PUSH Type One (1) Shift Rod A
• ZX-6RR 2004 :PUSH Type One (1) Shift Rod A
• ZX-6RR 05-06 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• ZX-6r 07-08 :PUSH Type One (1) Shift Rod A (remove/cut off 6 sections)
• ZX-6r 09-10 :PUSH Type One (1) Shift Rod A
• EX 650R 06-08 :LINEAR PUSH Type
• Z750 04-05 :LINEAR PUSH Type
• Z1000 03-06 :LINEAR PUSH Type
• ZX-10r 04-05 :PUSH Type One (1) Shift Rod B
• ZX-10r 06-07 :PUSH Type One (1) Shift Rod A (remove/cut off 2 sections)
• ZX-10r 2008-10 :PUSH Type One (1) Shift Rod A (remove/cut off 2 sections)
• ZX-12r 00-01 :PUSH Type One (1) Shift Rod A (remove/cut off 2 sections)
• ZX-12r 02-03 :PUSH Type One (1) Shift Rod A (remove/cut off 2 sections)
• ZX-12r 04-05 :PUSH Type One (1) Shift Rod A (remove/cut off 5 sections)
• ZX-14r 06-07 :LINEAR PUSH Type
• ZX-14r 2008 :LINEAR PUSH Type
• ZX-14r 09-10 :LINEAR PUSH Type

Suzuki

• GSX-R 600 01-03 :PUSH Type One (1) Shift Rod B (removed/cut off 10mm + rotate spline)
• GSX-R 600 04-05 :PUSH Type One (1) Shift Rod B ( + rotate spline)
• GSX-R 600 06-07 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C (remove/cut off 3 section from each rod)
• GSX-R 600 2008 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C (remove/cut off 3 section from each rod)
• GSX-R 600 09-10 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C
• SV650 SV650S 03-06 :PUSH Type One (1) Shift Rod B
• SV650 SV650S 07-08 :PUSH Type One (1) Shift Rod A (removed/cut off 10mm)
• GSX-R 750 00-01 :PUSH Type One (1) Shift Rod B (removed/cut off 10mm + rotate spline)
• GSX-R 750 02-03 :PUSH Type One (1) Shift Rod B ( + rotate spline)
• GSX-R 750 04-05 :PUSH Type One (1) Shift Rod B ( + rotate spline)
• GSX-R 750 06-07 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C (remove/cut off 3 section from each rod)
• GSX-R 750 2008 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C (remove/cut off 3 section from each rod)
• GSX-R 750 09-10 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C
• SV1000 03-04 :PUSH Type One (1) Shift Rod B ( + rotate spline)
• SV1000 05-07 :PUSH Type One (1) Shift Rod B ( + rotate spline)
• GSX-R 1000 01-02 :PUSH Type One (1) Shift Rod B (removed/cut off 10mm + rotate spline)
• GSX-R 1000 03-04 :PUSH Type One (1) Shift Rod B (removed/cut off 10mm + rotate spline)
• GSX-R 1000 05-06 :PUSH Type One (1) Shift Rod B
• GSX-R 1000 07-08 :PUSH Type One (1) Shift Rod B (removed/cut off 10mm from EACH END)
• GSX-R 1000 09-10 :PUSH Type One (1) Shift Rod A + One (1) Shift Rod C
• GSX-R 1300 Hayabusa 99-00 :LINEAR PUSH Type
• GSX-R 1300 Hayabusa 2001:LINEAR PUSH Type
• GSX-R 1300 Hayabusa 02-07 :LINEAR PUSH Type
• GSX-R 1300 Hayabusa 2008 :PUSH Type One (1) Shift Rod B (removed/cut off 17mm from EACH END)
• GSX-R 1300 Hayabusa 09-10 :PUSH Type One (1) Shift Rod B (removed/cut off 17mm from EACH END)
• BKing 08-09 :PUSH Type One (1) Shift Rod B

Yamaha

• Road Star Warrior 02-08 :PUSH Type
• FZ6 04-08 :LINEAR PUSH Type
• FZ1 06-08 :PULL Type One (1) Shift Rod B + One (1) Shift Rod C
• R6 03-05 :PULL Type One (1) Shift Rod A + One (1) Shift Rod D (remove/cut off 1 section from the D rod only)
• R6S 06-08 :PULL Type One (1) Shift Rod A + One (1) Shift Rod D (remove/cut off 1 section from the D rod only)
• R6 06-07 :PULL Type One (1) Shift Rod A + One (1) Shift Rod D (remove/cut off 4 sections from
• R6 08-16 :PULL Type One (1) Shift Rod A + One (1) Shift Rod D (remove/cut off 4 sections from the A and remove 2 sections and -16mm from the D rod)
• R1 02-03 :PULL Type
• R1 04-05 :PULL Type One (1) Shift Rod A + Two (2) Shift Rod C (remove/cut off 2 sections from only 1 of the shit rod C's)
• R1 07-08 :PULL Type One (1) Shift Rod A + Two (2) Shift Rod C (remove/cut off 2 sections from only 1 of the shit rod C's)
• R1 09-14 :PULL Type One (1) Shift Rod A + Two (2) Shift Rod C