Galfer Yamaha YZF-R1 07-14 G1375 HH Front Brake Pads

***Video Reviews***

Galfer Advance Ceramic Full Metallic HH Compound:

The Galfer Braking System 1375 compound front brake pads are the result of many long days at the racetrack and on the brake dyno. Based on Advanced Ceramics, this compound is meant for the track. It offers very fast heat recovery for more consistent braking which, in turn, gives the rider more feel. This is the pad of choice for most aggressive street riders and racers at the top of club levels and AMA contenders. These pads are very easy on rotors since they do not have the same levels of metallics in them as many O.E.M. and after-market brands. The 1375 compound also features a ceramic-coated back plate, which helps to dissipate heat away from the brake pad and reduces the amount of heat transferred into the caliper pistons. This gives you a cooler running system that will be able to withstand more heating cycles and deliver consistent braking. Available for front calipers Supersport and Superbike applications (600cc - 1000cc).

• IMPORTANT NOTE: Brake Pads are sold 2 Pads to a Card. If your motorcycle has 2 front calipers you will need 2 Cards to replace the pads on your bike.
• Will withstand friction ratings of 0.7u and does not require any heat to deliver friction
• Advanced ceramic technology allows for pads to "cool off" as soon as pressure is released from the brake lever
• Requires very little brake pressure effort under repeated braking
• Recommended to those looking for the "edge" or "ultimate" stopping feel and control

Galfer strongly recommends following these BED-IN directions:

• (1) Clean the brake rotor(s) with thin sand paper and water prior to new pad installation.
• (2) Towel dry the rotor surface after sanding.
• (3) Install the new pads and be easy with the brakes for the next 40-50 miles.