Motorcycle Apparel and Parts Specialists
The Best Gear, Service & Price
Customer Service
Key Features:
The Ultimate Chain and Sprocket Alignment Tool. Simple to set-up with Laser Precision. No more eyeballing using steel rods, do the job right using Laser Precision. Attach the tool to the rear sprocket and activate the Laser. Check alignment along the length of the chain or between sprockets, adjust as required, re-check to verify correct alignment and you’re done. The body of the tool is CNC machined billet 6061 T6 aluminum. The key features of the machined body are the laser hole and the clamp leg face. Both are machined in the same set up to ensure a coplanar relationship is maintained between both. As the leg of the clamp sits flush on the sprocket during use the centerline of the laser will follow accordingly. The laser is nested in the clamp body and activates by use of an on off push switch. There is also a cylindrical pocket machined into the clamp body which is used to house spare batteries. The tool assembly also consists of a screw sub assembly. The screw material is nylon, chosen so it will not scratch the sprocket face during set-up and use. During assembly the alignment is checked over distance on a precision ground fixture and is Factory Certified, no adjustment is required by the user. Don’t mess around, do the job right with Laser Precision.
The Precision Laser Alignment Tool should be used after the following Applications:
|
|
Product Instructions |
