Graves Motorsports Honda CBR1000RR 2017-2019 Fender Eliminator Kit with ultra bright LED tag light included. Graves Motorsports Fender Eliminators for the all new CBRs, are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look.
The Graves tag kits are designed to have multiple options. Use with stock Honda rear turn signals, some aftermarket signals (by moving the mounting position of the signal holders - custom mounting hole may apply), or without signals at all by removing the turn signal mounts completely.
All Graves Motorsports Honda fender eliminator kits are fabricated from black power-coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your CBR 1000 RR needs to clean up the tail section from Gravesport.com!
Write Review
-
Graves motorsports cbr1000rr 17-19 fender eliminator
Put this on my '17 fireblade, it's a snug fit but works well, bike looks much better without the stock rear fender, I cut both the wire for the included license plate light and the connector wire to make it shorter, it's way longer than it needs to be. I have soldering irons and lots of other tools so no buggy there, included solder/heatshrink kind of sucks, in a pinch it might be ok but the second one didn't stick and was useless, I opted to solder it myself and apply my own heatshrink tubing. It took me a little bit to get the bike apart and back together again but it was overall a pretty easy installation. I like it.
-
Not the best quality
Main bracket will not allow lower splash guard to fit correctly without modification to splash guard. Instructions are on YouTube with not the best camera angles.. Funny thing is.. when the video gets to reinstallation of the lower splash guard.. you can see the guy is having problems getting it to fit.. then the video is edited and jumps forward a couple seconds and the guard is already magically installed and he's on the next step. Tag bolts are too long and hit the turn signal bolts, the tag bolts also hold the turn signal brackets on, so if you take your tag off for any reason.. your turn signals come off too and have to be reinstalled? Also you can't use your factory tag light. A cut and splice led light with 3M VHB is included if you are good with chopping up your factory harness. Save your money and go for something nicer. I'd return this if it weren't such a pain in the butt to take off.
-
Rear fender eliminator
Great product,fits nicely,
- Availability:
- STG Part Number:
- G|1572-FEH-17CB1-K|0
- Manufacturer's Part Number:
- 4
