Yamaha R6 mirror block off plates from New Rage Cycles is a bolt on kit that will clean up the front end of your bike completely! If you are removing your stock mirrors for NRC front signals or any aftermarket front blinker replacement, these block off plates fill the void on the front fairing.
On the 2017 and up R6 the front turn signals are integrated in the stock mirrors. That said installing the mirror eliminators creates a need for front signals if you are street riding. We recommend installing the New Rage Cycles LED Front Turn Signals with the Mirror Eliminators. We installed these on our 2017 STG Yamaha R6 Project bike along with the Mirror Eliminators with How To Videos on our project bike page.
Installation Instructions|
| New Rage Cycles Yamaha R6 2017 and up LED Front Turn Signals |
|
| New Rage Cycles Yamaha R6 2017 and up Fender Eliminator |
|
| 2017 Yamaha R6 STG Project Bike |
Write Review
-
My type of product…
NRC mirror eliminators is great their small and light and looks great on my 2020 r6. I recommend these if your tired of them bunny ears mirrors your running or your doing your regular track day. Can’t forget stg for the fast shipping durning the pandemic you guys are great…..
-
NRC TURN Mirror Block Off Plates
nice sleek look!
-
One Sided
I was using these for my hotbodies install, when I pulled them out seen that both plates were for the left side only (as your looking at the front of the bike). You can use them but the right side does not sit flush and the screws don't sit flush.
-
It’s alright
Looks a lot better with the eliminators than without. A bit smaller than the actual hole.
- Availability:
- STG Part Number:
- N|2501-R6-MBO|0
- Manufacturer's Part Number:
- 1
