Pit Bull Ducati Panigale V4/Large Hub Hybrid One Armed Rear Stand

Pit Bull's new Elite One Armed Rear Stand was designed to meet the needs of the Ducati Panigale V4 & Multistrada 1260, as well as the Kawasaki H2/H2R (up to 2018) when equipped with a different pin. The design features a lower cross tube for increased tire clearance as well as an overall lower height for more leverage. This stand could be used on other motorcycles with single sided swingarms but the primary benefit would be increased leverage. Sold complete with pins to fit the Ducati large hubs, but pins are interchangeable to fit other bikes.

This stand was specially designed to allow for tire-warmer use/clearance with the Panigale V4. If you don't have a Panigale V4, THIS stand will suit your needs at a cheaper price!

Also fits Ducati 1098, 1198, 1199, 1299, Diavel, xDiavel,  Multistrada 1200, Monster 1200, Streetfighter 1098/1198, or '17 Ducati SuperSport.

If your 1098 is one of the first 2007 models to arrive from Italy, select "Right Pin Only" from the drop-down menu when you add the item to your basket because the hole on both sides of the early '07 models were the larger size, whereas all future shipments were slightly smaller on the left side.

DIAVEL OWNERS: For the Diavel the wide tire makes it impossible to insert the pin fully on the right side, so the only available option is the standard which lifts the bike from the left side. There is currently no stand or pin that is recommended for the right side of the Diavel.

NOTE: Does NOT fit Ducati 998, 996, 916, 848, 748, Monster 796, 848 Streetfighter, HyperMotard, Monster 1100, Monster S4R, Monster S2R, Multistrada 1000, M900E, or Diavel (right side).

Sold complete, but pins are interchangeable to fit other bikes. If you would like to use this stand from BOTH the Drive and Non-Drive Side of your bike you will need BOTH PINS. If this is the case please select "Both Pins" in the drop down menu.