-
Pit Bull Trailer Restraint System from Sportbiketrackgear.com
Pit Bull Trailer Restraint System https://www.sportbiketrackg...
-
How Pit Bull Stands Get Their Famous Gold Color from Sportbiketrackgear.com
https://www.sportbiketrackgear.com/Pit-Bull How Pit Bull Stan...
-
Pit Bull Products: American Made from Sportbiketrackgear.com
https://www.sportbiketrackgear.com/Pit-Bull Pit Bull Products...
We stock the complete line of Pit Bull Trailer Restraint Systems. If you haul your bike there is no easier or safer way than to use The Pit Bull Trailer Restraint. We have them mounted in our trailer and so should you. Made in the USA with great pride. You will replace the bike before you replace a Pit Bull Motorcycle Stand! We are proud to be the largest Pit Bull dealer!
IMPORTANT INSTALLATION NOTE: All Trailer Restraint Kits ship with 2" long mounting bolts designed for standard 3/4" thick floors. If your trailer floor requires longer bolts to complete the installation please use the link found below and add the appropriate kit to your order.
Order Longer Pit Bull Trailer Restraint Bolt Kits
Watch the YouTube Video to see how the system mounts to the rear axle of the bike and how it simplifies loading. Not only is it easier it is also more secure and better for the bike to be transported without the suspension being bound and compressed with conventional methods.
The Pit Bull Trailer Restraint System is a revolutionary way to transport your motorcycle using a combination of features never seen before. It holds the bike from its rear axle and allows both tires to rest on the floor of the trailer or transport vehicle. It offers the following three advantages:
- (1) There are no straps holding the bike down. This minimizes the space used in the trailer and eliminates the chance of damage caused by straps.
- (2) The motorcycle rests on the trailer floor with no added force on the suspension. This means no more blown fork seals caused by heavy strap tension, and a flat tire on the bike will not change how securely the bike is held.
- (3) This is the quickest, easiest system available for loading/unloading your bike for transport. One person can easily roll the bike into place until it is captured by the restraint.
- Note: The "Ducati single sided swing arm" listing excludes the Ducati 1098.
Additional Information & Instructions:
Installation Instructions -
Pit Bull Trailer Restraint System from Sportbiketrackgear.com
Pit Bull Trailer Restraint System https://www.sportbiketrackg...
-
How Pit Bull Stands Get Their Famous Gold Color from Sportbiketrackgear.com
https://www.sportbiketrackgear.com/Pit-Bull How Pit Bull Stan...
-
Pit Bull Products: American Made from Sportbiketrackgear.com
https://www.sportbiketrackgear.com/Pit-Bull Pit Bull Products...
Write Review
-
Awesome product!!!
Recently purchased a Pit Bull Trailer Restraint from STG and I was not disappointed. Awesome restraint system for my R1 and I will likely by the pins to use on my YZ250F too. Top quality part, easy install and easy to use. One of the best purchases I've made in recent years. Two thumbs up for this product and for STG. Thanks.
-
TOP NOTCH PRODUCT
After using the tradition chock type front wheel restraints for many years, I knew when trading up on trailers, this would be my choice. I was even more surprised at the amazing quality after receiving them in one day from STG. If I had looked closer at the system earlier, and noticed the easy usability, I would have taken out the chock type years ago and replaced them with this product!
-
Love it!
100% American made, fits great! Haven't installed it on my enclosed yet but I'm sure it will mount up fine! Thanks stg and van for helping out on questions and the youtube videos are great!
-
THE BEST WAY TO TRANSPORT YOUR BIKE
This is my second Pit Bull TRS and so far it is the best method for trailering bikes that I have found. When you factor in the ease of installation, loading and unoading the bike, and of course how secure it is, there is no other system that I have found that even compares. Made in the USA by a company that will stand behind their product 100%. Did you know the owner of Pit Bull is a mechanical engineer and had a design that was used on the International Space Station? Mind = Blown!
-
No contest
The Pit Bull system is without a doubt, the easiest and safest way to transport your bike. It allows you to lock your bike into place in maybe a minute and with the reassuring feeling of knowing your suspension won't be damaged. Allows for easy transportation of two or more bikes in small trailers. I fit 2 bikes in a 5x10 enclosed trailer using 2 of these restraints. Why spend hundreds or thousands of dollars on suspension upgrades only to stress them out with tie-downs?
-
Fantastic product.
This trailer restraint worked great in my cargo van. its so fast and easy to load and unload my track bike now I don't think I'll ever use tie-downs again.
-
Awesome product
Easy to install and to use. Pitbull makes some the best products that last a life time.
-
It really is as simple as they say!
I mounted my floor plate with two of the four bolts running through a steel cross member under the floor of my trailer for absolute security. Attach the arm to the rear axle, push bike into trailer, lower arm, pull it into the floor mount, pin the locks, and drive away without a worry. Done! I bought a second for my other bike after seeing and using the first.
- Availability:
- STG Part Number:
- Manufacturer's Part Number:
