The Superbike Rear Brake Reservoir Kit includes: 1 Breather Cap, 1 12" length of 8mm Tygon 2375 Tubing and two 7/16" spring clamps. This kit is degigned as a performance oriented off road modification which may not be suitable for street use. Installation may vary from model to model. This kit will work for most Japanese Sportbikes allowing you to eliminate the stock rear brake reservior. Be sure to leave an adequate air gap in the tube after the brakes are bled to allow for expansion and contraction. Please watch our video for reference. By purchasing this kit you are acknowledging STG is not responsible for anything caused by misuse or misinstallation of this kit.
Tygon 2375 is a clear flexible tubing that is virtually unaffected by brake fluid, acids, bases, ketones, salts and alcohols.
Tygon tubing is used for non pressurized brake fluid connections, like connecting your remove reservoir to your master cylinder or to replace the reservoir all together. Since the tubing is clear, you can see the brake fluid inside unlike black tubes that come stock from the manufacturer.
- Fits Most Japanese (Nissin) OEM Master Cylinders and Reservoirs
- Sold by the foot.
- Part Number: AJK00022
- Tubing Length: 12in (30.5cm)
- Tubing Inside Diameter: 5/16in (7.94mm)
- Tubing Outside Diameter: 7/16in (11.11mm)
- Minimum Bend Radius: 1-1/4in (31.75mm)
- Note: Tubing compatible with most 8mm fittings
Write Review
-
Perfect!
Exactly what I was looking for, and it shipped out quick! Thank you!
-
Superbike reservoir
Superbike reservoir, super easy, looks super slick (race S#^t), get for your Sportbike and look super cool too...!!
-
Looks great
Cleaned up my rear brake reservoir and looks a lot better. Easy install.
-
Easy install
Installed this on my 2008 R6. Easy to do. I did flush my brake fluid before doing this. I used an old liquid medicine dropper that pharmacies give out to add fluid to the hose. Worked great.
-
Great product
Your bike will look sexier. Top of that high quality product
-
Great!
Very nice and clean look.
-
Superbike rear reservoir kit
Simple install!
-
SUPERBIKE RESERVOIR KIT!!
Nice little inexpensive kit!! The bracket holding my stock rear brake reservoir snapped off so I decided to go with this option. Looks awesome and clean. Plus the shipping was super fast!!
-
It is what it is
It's a simple tygon tube with a cap. Install was easy, it maintains brake pressure. Looks great. Might have to trim other pieces from the bike due to it.
- Availability:
- STG Part Number:
- S|STG-SBK-R-RES|0
- Manufacturer's Part Number:
- 1
