The Superbike Rear Brake Reservoir Kit includes: 1 Breather Cap, 1 12" length of 8mm Tygon 2375 Tubing and two 7/16" spring clamps. This kit is degigned as a performance oriented off road modification which may not be suitable for street use. Installation may vary from model to model. This kit will work for most Japanese Sportbikes allowing you to eliminate the stock rear brake reservior. Be sure to leave an adequate air gap in the tube after the brakes are bled to allow for expansion and contraction. Please watch our video for reference. By purchasing this kit you are acknowledging STG is not responsible for anything caused by misuse or misinstallation of this kit.
Tygon 2375 is a clear flexible tubing that is virtually unaffected by brake fluid, acids, bases, ketones, salts and alcohols.
Tygon tubing is used for non pressurized brake fluid connections, like connecting your remove reservoir to your master cylinder or to replace the reservoir all together. Since the tubing is clear, you can see the brake fluid inside unlike black tubes that come stock from the manufacturer.
- Fits Most Japanese (Nissin) OEM Master Cylinders and Reservoirs
- Sold by the foot.
- Part Number: AJK00022
- Tubing Length: 12in (30.5cm)
- Tubing Inside Diameter: 5/16in (7.94mm)
- Tubing Outside Diameter: 7/16in (11.11mm)
- Minimum Bend Radius: 1-1/4in (31.75mm)
- Note: Tubing compatible with most 8mm fittings
Write Review
-
It is what it is
It's a simple tygon tube with a cap. Install was easy, it maintains brake pressure. Looks great. Might have to trim other pieces from the bike due to it.
-
Great piece of kit
Second one I've bough and it's a great upgrade and the kit is quality with everything you need to make the conversion.
-
Good Fit
cleans up quite well. a great idea.
-
Trick Reservoir Kit
This Superbike Reservoir kit is super easy to install ~ less than 5 minutes to remove the old kit, cut the supplied tygon tubing to length and secure the fittings. Simply re-bleed the brakes and you are off and running with a trick looking rear reservoir kit!
- Availability:
- STG Part Number:
- S|STG-SBK-R-RES|0
- Manufacturer's Part Number:
- 1
