All stands are the same right? Not exactly. Woodcraft interviewed top mechanics and asked them what they feel are the most important features in a stand. The overwhelming responses were: low lift effort, clearance for working, and wheel design (for ease of rolling and stability). Woodcraft incorporated these features into their full-range Woodcraft Wheel Stands, all proudly built in the USA.
3 DIFFERENT STANDS IN ONE
Woodcraft is excited to introduce their NEW rear stand for 2017! Their rear stand now comes in:
- Pad, for bikes without spools/hooks
- Spool, using standard round spools
- Superbike Lifter, using low profile hooks for aerodynamics and durability
The laser etched, removable uprights allows you to swap between stands in less than ten seconds and they make transport life much easier for you.
Note: Although this is considered a universal stand, it may not fit all applications (extra large motorcycles, such as the Hayabusa, etc.) If you have any questions regarding this stand, please reach out to us before ordering.
STABILITY
Woodcraft stands provide the highest standard in the Industry for our stand wheels. NEW QUAD 5" wheels are unmatched for both stability and their ability to roll smoothly over rough surfaces.
STRONGER, LIGHTER
1.5" OD base handle allows you lift the stand with low physical effort without sacrificing stability or work space.
INTEGRATED AXLE AND HARDWARE HOLDERS
Keep your axle and hardware off the floor and from rolling around in the dirt.
INTEGRATED RADIAL MOUNT CALIPER HANGERS
Keep brake calipers from dangling and pressure off of them during wheel changes.
NEW KEY FEATURES:
- Adjustable Lift Height for easier wheel changes and lower lift effort
- 10 Second Removable Uprights easier transport - take up less room in the truck
- Integrated Axle & Hardware Holders keep your parts out of the dirt
- Quad 5" inch wheels for smoother rolling and more stability
- Integrated radial mount caliper hangers to keep pressure off your brake lines during wheel changes
|
Woodcraft Stands |
|
 |
|
 |
Front Under Fork Stand - ABS Friendly Design:
|
 |
|
 |
|
|
Woodcraft Rear Stand Adapters Do you want the ability to switch your Woodcraft Adjustable Rear Stand to an additional lifting method? See below! |
|
|
|
|
|
Write Review
-
Woodcraft Adjustable Rear Spool Stand
Its a nice stand, probably the nicest stand out there and nicest one Ive owned. Its super light and lifts the bike with ease. Its height adjustable but more heights then the pin can handle. I would not use a certain height where you cant use the pin but thats me. The clamps are a little to light weight not as strong as I think they should be but they do the job. The powder coat is nice but a little slippery where when you have to grab to lift the bike.
-
Awesome Stand
Easy to assemble, sturdy, does exactly what it is supposed to do. Would defiantly buy this again.
-
Awesome Stand!!
My very first Woodcraft product and WOW!! great quality and built. Love this stand. Definitely worth the $$.. and also Sportbiketrackgear is awesome to buy from!! have purchases alot of products and always a great experience!!
-
Woodcraft rear stand
Awesome stand.. just buy it you won't be disappointed
-
Best Stand Ever!
Fast shipping even during the Covid-19 outbreak. Product arrived in Perfect condition.
-
Woodcraft rear stand
I was searching the market for a bike stand and came across the review done by Brian. After review price/function I decided to go with this stand and it’s amazing. The adjustability of the height has already came into play for me, also the build quality and attention to detail is amazing, from the axel holder to the sliders on the bottoms to protect the stand when the bike is on it. You can tell this stand was build by a rider/ racer for a rider. Now I’m looking to get that matching front.
-
Rear Spool stand
Solid contruction and love the adjustablity. A few nitpicks: like someone else said has more height markings than actual height adjustability pin settings. Do not like the bicycle clamps. Can not get them to easily clamp tight. Keep coming loose. Although sort of unnecessary, may get some cheap CNC alloy replacements on ebay. Also tube fit is very tight on one side. Have to use a rubber mallet to sink arm down and once down virtually impossible to pull back up by hand if additionally adjustment is needed.
-
Quality
Like always, Woodcraft comes through with another high quality product. Quality materials provide strong, but lightweight stand. Fit and finished to exacting specifications. Adjustability enhances its usefulness in application and equipment variability.
-
Great useful stand
very light stand. easy to adjust and set up. so far it works well on my ninja400. only time will tell if its as good as my other stands but looks well made.
- Availability:
- STG Part Number:
- W|W25-01051|0
- Manufacturer's Part Number:
- 1
