FOR RACING USE ONLY - FOR USA MODELS ONLY
Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.
|
| Installation Instructions |
Write Review
-
Ninja 300
Works great.
-
Woodcraft Keyswitch eliminator for Ninja 300
Generally easy to install and plugged in without undue difficulty. Works great and definitely cleaned up the top triple tree. If you want to eliminate the left handlebar turn signal/horn cluster, this would be a good time while you have the fuel tank elevated. Leave the clutch sensor connected though. It ha a separate pigtail.
-
Daughters Track bike
Installed the woodcraft key switch elimination harness to my daughters bike. Was very easy to install and helped to shave some more weight off the bike well worth the money
- Availability:
- STG Part Number:
- W|W43-0104|0
- Manufacturer's Part Number:
- 1
