The Woodcraft Kawasaki Ninja 500 Axle Sliders can be installed on the front or the rear axle of your Ninja 500. If you would like to install them on BOTH axles you will need to order 2 full kits to get that done. We installed these on our 2018 STG Ninja 400 Project Bike and a have a video in this listing covering all the steps it takes to get this project completed. Installing this kit on the front axle will help to protect the fork bottoms as well as the axle in a crash. Installing them on the rear axle will help to protect the swingarm and rear axle in a crash. An added benefit of installing this kit is the safety pin that retains the slider on the castle nut replaces the OEM cotter pin that will fail after a couple wheel changes.
Woodcraft axle sliders are designed for racers with a focus on ease of use and practicality. Woodcraft axle sliders help to protect the valuable fork lowers and swingarm on your bike in the case of a crash. We worked long and hard on our axle slider design to ensure they add as little time to a wheel change as possible. No more dealing with through rods, simply remove the puck bolt and you're ready for a wheel change. Our pucks receive the perpendicular mount passed down from our patented frame sliders to provide a solid sliding surface, maximizing puck life.
Additional Information & Instructions:
Installation Instructions - Availability:
- STG Part Number:
- W|W45-0144FR|1
- Manufacturer's Part Number:
- 2
