Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.
|
| Installation Instructions |
Write Review
-
Works With Modification
I love not having to deal with a key on my track bike but I did have to make the wires to the key switch plug longer. The "top" of the T goes between the male and female harness plugs for the kill switch and the "tail" goes to the plug for the key switch. The only problem is that the kill switch plug is up behind the right side of the gauge cluster and the key switch plug is under the front of the air box. This key eliminator is made way to short to reach so you will have to cut and splice the two wires that go between the plugs.
- Availability:
- STG Part Number:
- W|W43-0201|4
- Manufacturer's Part Number:
- 2
