FOR RACING USE ONLY - FOR USA MODELS ONLY
Exclusively available from Woodcraft. Our Key Switch eliminator lets you remove your stock ignition switch saving weight where it counts - up high! Removing your stock ignition will also free up valuable space for steering dampers and lap timers. The things you need go in the space you save. There is no longer a need for keys. The best thing about our Key Switch Eliminator is the ability to simply "Plug and Play". It installs in seconds and requires no modifications to your stock harness - no need to cut any wires! This means easy re - installation of stock components down the road.
|
| Installation Instructions |
Write Review
-
Simple and works
Ordered this 06-08 key eliminator for my 2009 Daytona 675 and it was a simple plug and play operation. Even though my D675 is an Australian delivered 2009 bike I ordered from the pictures of the connectors. Works as advertised. A bit expensive to ship to Australia but worth it not to have a key for the track. Cheers Dave
-
Another quality item from Woodcraft
Works just as the description says. Easy install once you get the shear bolts out of the OE keyswitch. I highly suggest using a stud extractor to pull the bolts rather than just drilling the heads off. Good quality wiring and separately fused. I would definitely buy it again.
- Availability:
- STG Part Number:
- W|W43-0500|0
- Manufacturer's Part Number:
- 2
