The Woodcraft Yamaha FZ-09 Clip-On adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. With this kit you are able to adjust the ergonomics of the FZ-09 while giving the bike a custom, street fighter look. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the "up" or "down" position. The 2 inch riser setup should be run in the "up" position only.
NOTE: A 10MM spacer required for 1 and 1.5 inch kits in the down position in order to have proper tank clearance. If you plan to run the clamps in the "down" position please contact us to purchase the spacer kit, part number 12-SPACER.
Drop From OEM Bar Height (measured from the end of the bar)
- 2 inch riser "up" - 1.75 inches
- 1.5 inch riser "up" - 2.25 inches
- 1 inch riser "up" - 2.75 inches
- 1 inch riser "down" - 3.25 inches
- 1.5 inch riser "down" - 3.75 inches (best for racing)
Instructions and Exploded View