Dramatically change the feel of your foot controls with Woodcraft's full rearset kit.
The full rearset kit consists of the rearset brackets, footpegs and all of the needed hardware to install the kit properly, plus a complete shift pedal with an adjustable toe peg.
These kits assume that you currently have the OEM rearsets on your bike.
They are made from tough, aircraft grade 6061 T6 Aluminum and anodized with a black finish.
This kit has eccentric pegs that have 12 positions of adjustment ranging from 1/4" lower than stock to over an inch higher than stock. They are much stronger than OEM brackets and will give your bike a look that will separate you from the crowd.
IMPORTANT NOTE: folding toe pieces are available as an option at an extra cost (see drop down menu).
This kit can be used in either standard or GP shift position.
NOTE: This kit fits all of the standard FZ10 and MT10 models in both standard and GP shift. If your bike comes with a factory Yamaha Quickshifter (like the MT-10SP) this kit works perfectly for standard shift but would require an ECU flash to allow the Yamaha quickshifter work in GP position. For aftermarket quickshifters, riders will want a "pull" style for standard shift and a "push" style for GP shift.
NOTE: Modifications to the OEM brake bracket may be required on some aftermarket exhaust systems.
Instructions and Exploded ViewWrite Review
-
WOODCRAFT Yamaha FZ-10 rearsets
I didn't buy the rearsets from STG but I have purchased other items from STG so I hope it's OK to post a review. I gave the rearsets 5 stars. I bought them directly from Woodcraft as soon as they were available. The kit allows you to use the stock brake light switch which is a huge luxury. I found there to be lots of adjustability. I set the pegs on the lowest setting ( significantly higher than stock) . The lowest setting gave me more than enough clearance for intermediate track day with plenty of leg room to tour ( I have a 34 inch inseam). As for the stiffness in rotating the shifter posted from the reviewer Mr. Lee , I was able to address; with loctite on the shifter mount bolt 04-BH840Z , I simply backed off the bolt a few degrees- until the shifter moved like it was in butter, and because the bolt is loctited, it hasn't moved. I have 10,000 miles on these rearsets and love them.
-
not really impressed
I've always been a fan of Woodcraft parts both on my race bike and street bike. This rearset for FZ-10 is just about average to my view. it works ok, not as smooth as I though it would operate. both brake lever pivot and shift lever pivot have some resistance while rotating. Adjustability of foot peg is somewhat limited as well. For what I paid, not so satisfied
- Availability:
- STG Part Number:
- Manufacturer's Part Number:
